5 Micron Polyspun Sediment Water Filter Replacement Cartridge 10" x 2.5"

In stock
  • Removes sediment
  • Quality product
  • Fits standard filter housings

5 Micron Polyspun Sediment Water Filter Replacement Cartridge 10" x 2.5"


These sediment filters are compatible with most liquids and are highly effective for sediment, rust, sand, silt, and algae removal. Replacement of this cartridge is recommended approximately every 6-12 months, dependent on usage and the water quality.

Fit all standard industry water filter housings 10” x 2.5”

Sediment filtration is a vital part of any water filtration process. A sediment filtration cartridge does just that, it removes the sediments from the water source you are trying to filter. At times preparing the water quality for the next stage in the process so that cartridge can perform at its best and last for as long as possible.

Available in a range of dimensions and micron sizes for different applications.

Polyspun Cartridges

Polyspun Sediment cartridges offer a simple means of filtration.

They are made from spun bonded polypropylene, the manufacturing technique of these cartridges results in no centre core to the filter, thus not restricting the filter performance.

The materials also provide a resilient barrier to bacterial/chemical influence – preventing any buildup of unwanted waste (e.g. algae).

Cartridge Information

Filter cartridge manufacturers rate cartridges in "microns". Microns are a size measurement of the pore size, so the smaller the number, the tighter the filter. One-micron filters are for drinking water only.

Filter cartridge manufacturers also use the words "absolute" and "nominal" to describe their products' micron ratings. Absolute means absolute. Nominal means "more or less."


Sediment Cartridges Remove

  • Algae

  • Dirt

  • Particulate matter

  • Rust

  • Sand

  • Sediment

  • Silt

Please note: Do not rely on sediment cartridges to filter untreated or unknown water sources for human consumption.

Drinking Water Filter Cartridges

It is the micron size & the physical size of the cartridge which determines what that particular sediment cartridge can be used for.

For whole house filtration you can go as low as 1 micron with a sediment cartridge but the most common size is 5 micron. For drinking water you would want to use from the 1 micron size down smaller.

When installing or replacing any water filter cartridges ensure the main water supply is turned off prior to starting. Ensure you know what you are doing or have a qualified person to help You.

Long lasting service life of 12 months

Cartridges are very easy to replace and only have to be changed over once per year.

Copyright © 2021 - Water Filters Wholesale. All rights reserved.